main logo

E-ink Screen

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 7 aprile 2025
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 67,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Display HAT (B) Module 800x480 Resolution 3.3v E-Ink Electronic Screen SPI Interface Red Black White Three-Color for Raspberry Pi Jetson Nano
Spedizione gratuita
star

95

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • No backlight, keeps displaying last content for a long time even when power down.
  • Ultra low power consumption, basically power is only required for refreshing. Wide Viewing Angle, Paper-Like Displaying Without Electricity.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags.
  • 72,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

91

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 12.48inch E-Ink Display Module 1304×984 Resolution with Embedded Controller SPI Interface Red/Black/White Three-Color E-Paper Display Screen
Spedizione gratuita
star

87

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. ESP32 control header, allows directly plugging control boards like e-Paper ESP32 Driver Board / ESP32-DevKitC.
  • SPI control interface, for working with STM32 or other MCU host boards. Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • Acrylic protective case, keeping the screen safe, nice looking. Comes with development resources and manual (examples for Raspberry P/STM32/ESP32).
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 248,99 € SU AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 7.3-inch e-Paper HAT (F), 7-Color e-Ink Screen with PCB, 800x480 Pixels, Low Power Consumption - for Raspberry Pi/Jetson Nano/STM32, Suitable for Electronic Shelf Labels, Meeting Badges, etc
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Advanced Color ePaper technology with an ACeP seven-color display and a resolution of 800x480
  • Low power consumption with minimal power usage during refresh and long-lasting display in case of a power outage
  • SPI Control interface compatible with Raspberry Pi/Jetson Nano/STM32, and other control boards
  • Onboard level shifting chip supporting 3.3V and 5V interfaces, adding to its versatility
  • Compatible with usage in applications such as electronic shelf labels, pricing tags, meeting badges, and more
  • 87,99 € SU AMAZON
Jacquard
Jacquard
Jacquard Screen Ink Extender, 4oz (JSI1100)      
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Professional Screen Ink extender
  • Mix with Jacquard Professional Screen inks
  • Makes inks more transparent
  • Will not alter the texture or consistency of the ink
  • 4oz jar
  • 17,12 € SU AMAZON
IBest
IBest
IBest 1.54inch E-paper Display Module 200x200 Resolution 3.3V/5V Two-Color E-ink Display epaper Screen for Raspberry Pi/Jetson Nano/Arduino/Nucleo Support Partial Refresh, SPI Interface
Spedizione gratuita
star

76

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 19,62 € SU AMAZON
Independently published
Independently published
Screen Printing For Fashion: How You Print Is How They Feel: 1
Spedizione gratuita
star

71

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9
Luke Ink Silkscreen
Luke Ink Silkscreen
Screen Printing For Fashion: How You Print Is How They Feel (A Business and Pleasure Series Book 1) (English Edition)
star

68

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10
e ink screen e ink screen cover e ink screen arduino e ink screen case ink screen e ink e-ink ink e e ink colori e-ink colori