main logo

E Ink Electronic Paper Display

I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento: 20 marzo 2025
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Display Hat Module 800×480 E-Ink Electronic Paper Screen for Raspberry Pi/Jetson Nano SPI Interface with ESP32 Driver Board(WiFi/Bluetooth)
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Universal e-Paper Driver Board with WiFi / Bluetooth SoC ESP32 onboard, supports various Waveshare SPI e-Paper raw panels
  • Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc
  • Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT; www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board
  • 72,50 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Display HAT (B) Module 800x480 Resolution 3.3v E-Ink Electronic Screen SPI Interface Red Black White Three-Color for Raspberry Pi Jetson Nano
Spedizione gratuita
star

84

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • No backlight, keeps displaying last content for a long time even when power down.
  • Ultra low power consumption, basically power is only required for refreshing. Wide Viewing Angle, Paper-Like Displaying Without Electricity.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags.
  • 72,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • Si tratta di un V4 (l'ultima versione) E-Ink display HAT per Raspberry Pi, 2.15 pollici, risoluzione 250x122, con controller incorporato, che comunica tramite interfaccia SPI, supporta l'aggiornamento parziale.
  • A causa dei vantaggi come il consumo energetico ultra basso (fondamentalmente l'alimentazione è necessaria solo per rinfrescare), ampio angolo di visione, display chiaro senza elettricità, è una scelta ideale per applicazioni come etichette per scaffali, strumenti industriali e così via.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede Raspberry Pi/Jetson serie Nano
  • Interfaccia SPI, per il collegamento con altre schede controller come Nucleo, ecc.
  • Traduttore di tensione integrato, compatibile con MCU 3.3V/5V. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32). Si prega di contattare il nostro servizio clienti 24 ore su 24 per risorse e manuali pertinenti
  • 20,99 € SU AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 7.3-inch e-Paper HAT (F), 7-Color e-Ink Screen with PCB, 800x480 Pixels, Low Power Consumption - for Raspberry Pi/Jetson Nano/STM32, Suitable for Electronic Shelf Labels, Meeting Badges, etc
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Advanced Color ePaper technology with an ACeP seven-color display and a resolution of 800x480
  • Low power consumption with minimal power usage during refresh and long-lasting display in case of a power outage
  • SPI Control interface compatible with Raspberry Pi/Jetson Nano/STM32, and other control boards
  • Onboard level shifting chip supporting 3.3V and 5V interfaces, adding to its versatility
  • Compatible with usage in applications such as electronic shelf labels, pricing tags, meeting badges, and more
  • 87,99 € SU AMAZON
IBest
IBest
IBest 2.13inch Passive NFC-Powered e-Paper Black/White e-Ink Display, No Battery Required, Wireless Powering and Data Transfer,Refreshed By Smartphone
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • 2.13" NFC-Powered E-Paper,Adopts Novel Passive NFC Technology,No Battery Required, No More Battery Life Trouble
  • Wireless NFC-Powered Display Refreshing.Passive NFC Solution, No Battery Required, No Messy Wiring, Stable Operation
  • No backlight required, e-Paper keep displaying the last content for a long time without power
  • No power adapter required.Compe with ABS case
  • You can modify the display content by smartphone.App is provided
  • 34,55 € SU AMAZON
Waveshare
Waveshare
Tri-color 1.54 Inch E-Ink Display Module Three-color Resolution 200x200 3.3v E-paper Electronic Screen Panel with Embedded Controller SPI Interface Support for Raspberry Pi/STM32/Nucleo/Jetson Nano
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display
  • No backlight, keeps displaying last content for a long time even when power down
  • SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing;Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Download link: www.waveshare.com/wiki/1.54inch_e-Paper_Module_(B)
  • 19,19 € SU AMAZON
Waveshare
Waveshare
Waveshare 1.54 inch E-Paper Screen Display Module 200x200 3.3v E-Ink Electronic Display with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano
Spedizione gratuita
star

68

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs; SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 19,19 € SU AMAZON
e ink electronic paper e-paper e-ink touch display display e ink display e-ink e ink display e-ink display e ink e paper e ink paper e-ink paper e-paper e-ink