main logo

E-ink Display Raspberry

I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento: 19 marzo 2025
IBest
IBest
2.13inch E-paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,62 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • Si tratta di un V4 (l'ultima versione) E-Ink display HAT per Raspberry Pi, 2.15 pollici, risoluzione 250x122, con controller incorporato, che comunica tramite interfaccia SPI, supporta l'aggiornamento parziale.
  • A causa dei vantaggi come il consumo energetico ultra basso (fondamentalmente l'alimentazione è necessaria solo per rinfrescare), ampio angolo di visione, display chiaro senza elettricità, è una scelta ideale per applicazioni come etichette per scaffali, strumenti industriali e così via.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede Raspberry Pi/Jetson serie Nano
  • Interfaccia SPI, per il collegamento con altre schede controller come Nucleo, ecc.
  • Traduttore di tensione integrato, compatibile con MCU 3.3V/5V. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32). Si prega di contattare il nostro servizio clienti 24 ore su 24 per risorse e manuali pertinenti
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
star

85

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 35,19 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 7.3-inch e-Paper HAT (F), 7-Color e-Ink Screen with PCB, 800x480 Pixels, Low Power Consumption - for Raspberry Pi/Jetson Nano/STM32, Suitable for Electronic Shelf Labels, Meeting Badges, etc
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Advanced Color ePaper technology with an ACeP seven-color display and a resolution of 800x480
  • Low power consumption with minimal power usage during refresh and long-lasting display in case of a power outage
  • SPI Control interface compatible with Raspberry Pi/Jetson Nano/STM32, and other control boards
  • Onboard level shifting chip supporting 3.3V and 5V interfaces, adding to its versatility
  • Compatible with usage in applications such as electronic shelf labels, pricing tags, meeting badges, and more
  • 87,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.3inch 6-Color E-Paper Screen With Driver Board, E-Ink Display(E Type), Low Power Consumption, 800x480 Pixel, SPI Communication, Suitable For Price Tag, Asset/Equipment Tag, Shelf Label...
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • 7.3inch e-Paper HAT (E) - with e-Paper Driver HAT. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • No backlight, keeps displaying last content for a long time even when power down. With standard Pi 40PIN GPIO extension header for Raspberry Pi series boards/Jetson Nano
  • Ultra low power consumption, basically power is only required for refreshing. Adapting SPI interface for Raspberry Pi/Jetson Nano/STM32 controller boards
  • Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
  • 107,99 € SU AMAZON
IBest
IBest
5.65inch E-paper Display Module 600×448 Pixels Colorful ACeP 7-Color E-Ink Display eink Screen epaper for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,STM32,Arduino
Spedizione gratuita
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • The e-paper with advanced Color ePaper (ACeP) technology, supports 7-Color display
  • Onboard SPI interface, for connecting with controller boards like Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH/Jetson Nano/Arduino/STM32, etc.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Package Content:5.65inch e-Paper Module (F) x1;PH2.0 20cm 8Pin x1
  • 72,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 9.7 inch E-Ink Display HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ E-Paper Screen with 1200x825 Resolution IT8951 Controller USB/SPI/I80 Interface
Spedizione gratuita
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • No backlight, keeps displaying last content for a long time even when power down
  • Low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4
  • USB/SPI/I80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/STM32)
  • 189,99 € SU AMAZON
e ink display raspberry display e ink display e-ink e ink display e-ink display e-ink display hdmi e-ink display pc e-ink display 10 e-ink display matter tablet e-ink display