Display Board
I 10 migliori prodotti di gennaio 2025
Ultimo aggiornamento:
23 gennaio 2025
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board 800×480 Resolution Screen (Type B) with 2.4GHz WiFi And BLE 5 Support,32-Bit LX7 Dual-Core Processor
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
ESP32-S3 4.3inch Capacitive Touch Display Development Board Type B,Integrates RGB Interface LCD With 5-Point Capacitive Touch, Multiple Peripheral Interfaces
IPS Display Panel,Excellent Display Performance, 160° Wide Viewing Angle
Capacitive 5-Point Touch,Supports Touch Function With I2C Interface, 5-Point Touch For Flexible Operation And Smooth Multi-Point UI Interaction
Supports Multiple Peripherals,Supports The Expansion Of Multiple Peripherals Via CAN, RS485, I2C And Isolated IO Interfaces
Supports Two Wiring Methods,Comes With Two Types Of Screw Terminals, Allowing For Bottom Or Back Wiring, Which Is More Convenient To Integrate Into Various Application Scenarios Such As DIN Rail Or Embedded Devices
49,39 € SU AMAZON
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800x480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Support WiFi, for Esphome/Home Assistant
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
ESP32-S3-Touch-LCD-4.3 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL
Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 BLE, with onboard antenna
Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash. Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
43,99 € SU AMAZON
LAFVIN
Lafvin 5 PCS 0.96 pollice OLED Display Module 128x64 Pixel Oled Display Screen SSD1306 Driver I2C IIC Serial Self-Luminous display screen Board Compatibile con Arduino Raspberry Pi(Blu e Gialllo)
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
0,96 pollici, risoluzione: 128 x 64, angolo di visione: > 160°, tensione di supporto: 3,3 V-5 V DC, consumo energetico: 0,04 W durante il normale funzionamento, illuminazione a schermo intero 0,08 W.
Driver integrato IC: SSD1300 Comunicazione: interfaccia I2C/IIC, richiede solo due porte I/O.
È compatibile con R3 Board e Mega, Raspberry Pi, 51 MCU, STIM 32, ecc.
Non utilizzare luci posteriori. Il display può anche brillare da solo Ha un contrasto estremamente elevato con punti luminosi e chiari, e anche un piccolo carattere è facile da leggere.
Il tipo di carattere non è incorporato nel sistema di controllo old. Un utente può generare questo file per mezzo di un software bianco.
14,99 € SU AMAZON
Field Goal
Display Board
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
DollaTek
DollaTek Monitor batteria LED Power Display Board DC 5-30V per auto Moto Golf Cart RV Battery Meter
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Questa scheda di monitoraggio della batteria può essere utilizzata per golf cart, auto, barca, camper, nave e altri monitor di tensione e carica della batteria.
Supporta la misurazione di batterie al piombo-acido (Р), batterie al litio ternario (L), batterie al litio ferro (F). Rilevamento della tensione DC5-30V.
Con display a LED, può mostrare lo stato della capacità della batteria 20%/40%/60%/80%/100%.
Tenere premuto il pulsante di configurazione per 2 secondi per selezionare il tipo di batteria, quindi tenerlo premuto per 2 secondi per accedere alla progettazione della tensione, quindi tenerlo premuto per 2 secondi per accedere alla progettazione della tensione.
Premere brevemente per impostare la tensione e il numero di stringhe. Infine, tieni premuto per 2 secondi per tornare alla visualizzazione del livello della batteria o attendi 5 secondi per tornare automaticamente.
6,99 € SU AMAZON
Waveshare
ESP32-S3 Development Board with 1.28inch Round Touch LCD Display,32-bit LX7 Dual-core Processor,Support 2.4 GHz Wi-Fi and Bluetooth 5(LE) ,Embedded GC9A01 Driver And CST816S Touch Control Chip
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory.Type-C connector, keeps it up to date, easier to use
Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color.Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture.
Onboard 3.7V lithium battery recharge/discharge header and 6 × GPIO pins via SH1.0 connector.
Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions
30,99 € SU AMAZON
Waveshare
Waveshare ESP32-S3 1.85inch Touch Display Development Board, 360x360, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & BT, Accelerometer & Gyroscope Sensor, ESP32 With Display
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
ESP32-S3-Touch-LCD-1.85 is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL, with capacitive touch function. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.
Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Onboard audio decoder, Microphone, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc
With capacitive touch function controled via I2C interface, with interrupt support. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Adapting UART, I2C and some IO interfaces
Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 1.85inch LCD display, 360×360 resolution, 262K color
Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
45,99 € SU AMAZON
Waveshare
Waveshare ESP32-S3 Development Board, 32-Bit LX7 Dual-Core Processor, Integrates GC9A01 Display Driver Chip, With 1.28inch IPS LCD, 240×240 Resolution, Supports WiFi/BT, Display, With CNC Metal Case
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (BLE), with onboard antenna
Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory. Type-C connector, keeps it up to date, easier to use
Onboard 1.28inch LCD display, IPS panel, 240x240 resolution, 65K color. Adopts CNC metal case with Acrylic dull-polish bottom plate
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture. Onboard 3.7V lithium battery recharge/discharge header and GPIO headers
Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios. Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions
29,99 € SU AMAZON
Waveshare
Waveshare ESP32-S3 4inch Capacitive Touch Display Development Board, 480×480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi, With Onboard Antenna
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4inch capacitive touch display, 480×480 resolution, 65K color
Onboard CAN, RS485, I2C interface and TF card slot, and integrates full-speed USB port
Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
46,99 € SU AMAZON
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-Bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 With Display, Support 3.7V Li Battery(NOT Included)
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(NOT Included)
Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
41,99 € SU AMAZON
display control board
led display board
display controller board
display board lego
nail art display board
display board science fair
science fair display board
#1 VINCITORE
