main logo

Can To Uart

I 10 migliori prodotti di settembre 2024
Ultimo aggiornamento: 30 settembre 2024
Waveshare
Waveshare
Waveshare TTL UART To CAN Mini Module, With TTL And CAN Conversion Protocol, Supports Bi-Directional Transmitting And Receiving, Multiple Operating Modes
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Onboard high-performance MCU and CAN transceiver chip, small in size, low power and easy to integrate. Built in TTL and CAN conversion protocol algorithm, enabling data conversion communication between TTL and CAN via simple configuration
  • Supports 3.3V operating voltage on TTL interface, supports both CAN 2.0A (standard frame) and CAN 2.0B (extended frame) on CAN interface. Supports 14 sets of configurable filters, can only receive CAN bus data in specific range and type via configuration
  • Supports 4 operating modes: transparent conversion, transparent with identifiers conversion, format conversion, and Modbus RTU protocol conversion. Supports offline detection and automatic recovery functions
  • UART communication baudrate: 1200bps～460800bps. CAN communication baudrate: 10kbps~1000kbps, configurable. Up to 1000 frames CAN buffer for buffering transmission data to prevent data loss
  • Supports high-speed conversion, the CAN transmission speed can reach up to 1270 extended frames per second with the UART at 115200bps and CAN at 250kbps (close to the theoretical max value of 1309), and can exceed 5000 extended frames per second with the UART at 460800bps and CAN at 1000kbps. Supports device firmware upgrade via TTL, more convenient for firmware update and function customization
  • 16,99 € SU AMAZON
HiLetgo
HiLetgo
HiLetgo 2pcs CP2102 Micro USB to UART Ttl Convert Module 6Pin Serial Converter Adapter UART STC Replace FT232 for Arduino
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • CP2102 MICRO USB to UART TTL Module
  • CP2102 Driver Download Link: http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx
  • With a resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download
  • With DTR trigger signal output can be directly arduino pro mini ATMEGA328P and other Arduino board download traffic.
  • 12,99 € SU AMAZON
AZDelivery
AZDelivery
AZDelivery UART-TTL USB Adattatore con Convertitore CH340G 3.3V e 5V con Cavo Jumper compatibile con Arduino incluso un E-Book!
Spedizione gratuita
star

95

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • ✅ Pronti ad operare : Non è necessaria l'installazione manuale dei driver, il diffuso chip CH340G è installato sull'adattatore
  • ✅ Facile da usare : I microcontrollori possono essere pilotati con 3,3V e 5V, un ponticello permette un facile cambio di tensione e di livello logico
  • ✅ Funzionamento sicuro : Non c'è rischio di danneggiare una porta USB, in caso di sovratensione l'adattatore USB è protetto da un fusibile
  • ✅ Comunicazione diretta : Lavorare con microcontrollori danneggiati, se la comunicazione via USB non è più possibile, è possibile utilizzare l'adattatore per comunicare direttamente con il chip
  • ✅ Questo prodotto include un E-Book che fornisce informazioni utili su come avviare il vostro progetto. Permette un'installazione rapida e fa risparmiare tempo durante il processo di configurazione. Include una serie di esempi di applicazioni, guide complete per l'installazione e librerie.
  • 7,49 € SU AMAZON
SEENGREAT
SEENGREAT
SeenGreat PL2303 USB to TTL UART Serial Port Module for Windows Linux MAC OS Fits Raspberry Pi 5 Adopts PL2303GS Chip Type-C Connector UART TTL level Switch 3.3V/5V Logic Level
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • This usb to uart module (SG-C2303-01C) is a high-performance USB-to-serial port module, adopts PL2303GS chip, supports USB 2.0 standard, which can realize fast and reliable data transmission and ensure efficient communication performance
  • The PL2303 USB to UART (TTL) Serial Port Module offers a variety of configuration options, including the setting of parameters such as baud rate, data bits, stop bits, parity bits, etc., meeting the requirements of different serial devices
  • The usb to ttl module is added rich flow control functions, such as hardware flow control (RTS/CTS) and software flow control (XON/XOFF), which can achieve more reliable data transmission and communication control
  • This usb to uart module is added the indicators of power supply, TXD, RXD , used to indicate the use status, and UART TTL level switching switch, which can be switched between 3.3V/5V conveniently and quickly. The hardware flow control pins CTS and RTS are derived to meet more applications
  • The PL2303 serial port module is suitable for a variety of operating systems, including Windows, Linux and Mac OS, and can be seamlessly connected with various mainstream computers and devices to provide stable and reliable serial communication; no need for additional drivers, just plug the module into the USB connector of the computer, it can be automatically recognized and started to use. It has the characteristics of plug and play, convenient and fast
  • 11,25 € SU AMAZON
SEENGREAT
SEENGREAT
SEENGREAT FT232 USB TO UART TTL Communication Module for Windows Linux MAC OS FT232 USB C Converter Module Onboard FT232RL Power Supply TXD RXD Indicators 3.3V 5V Logic Level
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#5

  • This FT232 USB to TTL serial converter adapter(SG-C232-01C) is adopts FT232RL chip, and electronic components, supporting USB 2.0 standardwhich features marvellous reliability and stability, and can work stably for a long time
  • This usb to uart module provides an easy-to-use serial port communication interface. Users only need to plug it into the USB port of the computer to transmit data through the serial port
  • The usb to ttl module is added UART TTL level switching switch, which can be switched between 3.3V/5V conveniently and quickly, and the indicators of power supply, TXD, RXD , which are used to indicate the use status
  • The hardware flow control pins CTS and RTS are derived to meet more applications
  • This ft232 usb uart module is compatible with multiple operating systems and development platforms, including for Windows, Mac OS X, Linux, etc., and also supports multiple development languages, such as C, C++, Python, etc.
  • 12,99 € SU AMAZON
TECNOIOT
TECNOIOT
TECNOIOT 5pcs Cp2102 USB 2.0 to UART TTL 5pin Module Serial Converter + Cable
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • 【CP2102TTL】The main chip CP2102, generate a virtual serial port after installing the driver.The USB to serial port can be used STC-ISPV3.94 above download old versions STC microcontroller that STC89C (LE) and STC12C (LE) Series.
  • 【Compatible】USB to take power , leads to the interface includes 3.3V(<40mA),5V, GND, TX, RX, the signal pin level is 3.3V, positive logic.Onboard status indicator lights transceiver , install the correct drivers status indicator lit, when the communication transceiver indicator flashes , the higher the intensity , the lower the baud rate.
  • 【Easy operation】Download STC microcontroller steps:TXD connected microcontroller RXD, RXD connected MCU TXD, GND connected to GND, 5V connected to VCC, points to download the software , and then provide the above said four feet into the microcontroller.
  • 【Compatible】support for the operating system : windows vista / xp / server 2003/200, Mac OS-X/OS-9, Linux
  • 【Note】 The MCU must have basic working conditions, including power, reset and clock ! While MCU TXD, RXD not followed by other peripheral devices, including the MAX232 and do not pick , otherwise it will lead to Download failed ! ! In the meantime , please do not disconnect the module from the computer !
  • 18,24 € SU AMAZON
Hailege
Hailege
Hailege 2pcs CP2102 Modulo convertitore seriale da USB 2.0 a TTL UART 5Pin STC PRGMR
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Velocità di trasmissione: da 300 fps a 1,5 Mbps
  • CP2102 Adattatore convertitore seriale USB 2.0 a TTL UART
  • Connettore USB Type-A standard e connettore TTL a 5 pin. 5 PIN PER 3,3 V, RST, TXD, RXD, GND E 5 V
  • Basta collegare l'MCU al computer!
  • Offriamo la Dichiarazione di conformità. Questo prodotto include anche un manuale utente elettronico, disponibile in inglese, tedesco, francese, spagnolo, italiano, polacco e olandese. Se hai bisogno di supporto, contattaci.
  • 11,50 € SU AMAZON
HiLetgo
HiLetgo
HiLetgo CP2102 USB 2.0 to TTL UART Serial Converter Module 5Pin STC PRGMR with Dupont Wire
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Questo è un convertitore seriale da USB 2.0 a TTL UART 5PIN CP2102. Connetti MCU facilmente al tuo computer.
  • Specifica USB 2.0 compatibile con 12 Mbps a piena velocità.
  • Connettore USB standard tipo A maschio e connettore TTL a 5 pin.
  • È nuovo di zecca, di buona qualità e alte prestazioni.
  • Tutti i segnali di interfaccia handshaking e modem.
  • 8,79 € SU AMAZON
TECNOIOT
TECNOIOT
TECNOIOT 4pin PL2303 USB to UART TTL Cable Module RS232 Serial 4-pin PL2303HX Cable
Spedizione gratuita
star

71

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 【FTDI 4PIN】 USB TO RS232 TTL PL2303HX ADATTATORE MODULO CONVERTITORE AUTOMATICO 5V USCITA, FORNISCE IL MODO MIGLIORE E COMODO PER COLLEGARE I DISPOSITIVI TTL RS232 O DEMO BRD. AL TUO COMPUTER, TRAMITE LA PORTA USB.
  • 【Design compatto】 Chip TTL COM PC-PL2303HX integrato; Connettore USB standard tipo A maschio e TTL a 4 pin; Lunghezza del cavo: 100 cm (39 3/8 in)
  • 【COMPATABILITÀ】 Un modo semplice e semplice per fornire supporto USB ai tuoi progetti; Disponibile per Linux, Mac, WinCE e Windows (XP, 2003), Vista, Win 7
  • 【Metodo di collegamento】 ripetizione Il pennello necessita solo di tre linee, utilizzate nelle tre linee di segnale RX TX GND, il VCC senza accesso. L'amica dell'ago 4,5 sopra, non collegata all'ago VCC e BT. Usa RXD collegato alla scheda target TX, TXD e target board RX, GND collegato a GND se non, RX e TX swap.
  • ➮║Driver for Win7 / 10: http://www.totalcardiagnostics.com/support/Knowledgebase/Article/View/92/20/prolific-usb-to-serial-fix-official-solution-to-code-10-error ➮║or here: http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41 ➮║Driver installation guide (you can also find the download link here): http://www.instructables.com/id/Usb-to-SerialTTL-adapter/
  • 9,38 € SU AMAZON
Waveshare
Waveshare
Waveshare USB To UART/I2C/SPI/JTAG Converter Supports Multiple Interfaces and Systems Compatible with 3.3V and 5V Multiple Protection Circuits Aluminum Alloy Case Wall-Mount and Rail-Mount Support
Spedizione gratuita
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Supports USB to 2-ch UART, or USB to 1-ch UART + 1-ch I2C + 1-ch SPI, or USB to 1-ch UART + 1-ch JTAG. Supports 2-ch high-speed UART interfaces, up to 9Mbps baud rate, with CTS and RTS hardware automatic flow control.
  • Supports 1-ch I2C interface, for easy operating EEPROM through the host computer or programming I2C devices such as OLED and sensor. Supports 1-ch SPI interface, with 2x chip select signal pins, capable of controlling 2-ch SPI slave devices at different times.
  • Supports 1-ch JTAG interface, can be used with OpenOCD for debugging and testing (Due to the limited testing of chips and software functions, users need to evaluate and test this function on their own).
  • Onboard 3.3V and 5V level conversion circuit for switching the operating level of the communication interface, better compatibility. Onboard resettable fuse and ESD protection circuit, provides over-current/over-voltage proof, safe and stable communication.
  • Aluminium alloy case with oxidation dull-polish surface, CNC process opening, solid and durable, well-crafted. High-quality USB-B and DC connectors, smooth plug & pull, durable and reliable, with anti-reverse protection. Suitable For College Students, Technical Engineers, Electronic Enthusiasts, Or DIY Makers For Learning And Debugging.
  • 24,99 € SU AMAZON
uart to usb usb to uart can bus to usb usb to can bus uart to ethernet