Bondtech Lgx Lite V2 Extruder
I 10 migliori prodotti di ottobre 2024
Ultimo aggiornamento:
11 ottobre 2024
Bondtech
Bondtech LGX® Lite V2 eXtruder
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
The Bondtech LGX Lite V2 is a filament feeder based on the LGX Large Gears eXtruder and uses Bondtechs new Dual Drive Technology based on larger drive gears.
Note: This extruder only supports 1.75 mm size filament and the extruder does not allow a mount plate between the motor and the extruder.
95,99 € SU AMAZON
Bondtech
Bondtech LGX® Lite V2 Extruder (no motor)
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Includes full size LGX Large Gears, maintenance windows and filament tension lever with 3 presets (open rigid flexible).
This extruder only supports 1.75 mm size filament and the extruder does not allow a mount plate between the motor and the extruder.
78,99 € SU AMAZON
Bondtech
BondTech LGX Lite Extruder Mirrored (with motor)
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
The LGX Lite Mirrored enables Independent Dual Direct eXtruder applications. By allowing the LGX Lite to face another LGX Lite, it minimizes the c-c (center to center) distance between nozzles.
The housing parts are professionally printed with polyamide 12 for maximum strength, precision and higher temperature resistance. To lower our ecological impact we are reducing our use of chemical dyes. This part is supplied with a wax protective coating to lower sensitivity to moisture and grease, while remaining fully functional.
95,00 € SU AMAZON
Bondtech
Bondtech LGX Lite to LGX Lite V2 Upgrade Set
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Use this set of parts to upgrade your LGX Lite eXtruder to the new V2 version. The LGX V2 is NOT compatible with Bondtechs current design of the Mini After LGX Lite upgrade Kit for Voron V0.
Use this set of parts to upgrade your LGX Lite eXtruder to the new V2 version. The LGX V2 is NOT compatible with Bondtechs current design of the Mini After LGX Lite upgrade Kit for Voron V0.
38,95 € SU AMAZON
Bondtech
Bondtech LGX Lite PRO Upgrade Kit for Creality K1 & K1C
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Upgrade your Creality K1 & K1C with the Bondtech LGX Lite Pro Upgrade Kit for enhanced speed, surface quality, versatility, and durability! Specifically designed to complement the Large Gears eXtruder LGX Lite Pro, the XY Axis and Extruder Upgrade Mounting Kit ensures seamless integration with this extruder. Crafted from sturdy grey polyamide (PA12) infused with glass beads, each component in the kit promises robust performance.
319,99 € SU AMAZON
Bondtech
Bondtech LGX® Lite Arrow Upgrade Kit for Creality
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
The LGX Lite Arrow for Creality and LGX Lite eXtruder plastic parts are now stronger – made of PA12 GF Polyamide 12 Glass Filled – and look even better with the sleek Bondtech black dye.
Upgrade kit with LGX Lite eXtruder to use on: Creality CR-6 SE; CR-6 Max; CR-10 Smart.
178,99 € SU AMAZON
Bondtech
Bondtech LGX® Lite Arrow for Creality
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Upgrade kit compatible with LGX Lite
86,14 € SU AMAZON
Bondtech
Bondtech LGX Lite PRO Upgrade Kit for Creality K1 Max
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Enhance your Creality K1 Max with the Bondtech LGX Lite Pro Upgrade Kit, boosting speed, surface quality, versatility, and durability! Designed to pair exclusively with the Large Gears eXtruder LGX Lite Pro, the XY axis and extruder upgrade assembly set ensure seamless compatibility. Crafted from resilient grey polyamide (PA12) infused with glass beads, each component in the set delivers lasting performance.
339,99 € SU AMAZON
UniTak3D
UniTak3D Ender 3 Neo Direct Drive Upgrades Staffa di Conversione per Ender 3 V2 Neo, Ender 3 Neo Funziona per Estrusore Dual Gear&Bowden (NON per Ender 3 Series)
Spedizione gratuita
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
⭐Applicazione: La piastra di conversione ad azionamento diretto è adatta per Ender 3 V2 Neo e Ender 3 Neo, NON per Ender 3 Series, NON compatibile con l'estrusore TITAN.
⭐Eccezionale controllo dell'estrusione: L'estrusore a trasmissione diretta migliora l'estrusione e la retrazione eliminando la necessità del tubo Bowden (PTFE), garantendo una retrazione precisa e un risultato di stampa migliore.
⭐Funzionamento Stabile: I fori della staffa di conversione di tipo split sono perfettamente allineati, con supporti su entrambi i lati per mantenere il centro di gravità al centro e rendere la struttura più stabile.
⭐Filamento Flessibile Supportato: Rispetto all'estrusione bowden, questa estrusione a trasmissione diretta migliora notevolmente la qualità di stampa del TPU e di altri materiali flessibili.
⭐Facile installazione: non si perde il volume di costruzione degli assi X, Y o Z. Non è necessaria alcuna modifica del firmware o del cablaggio: è sufficiente smontare la piastra originale della Ender 3 Neo e montare questo kit di aggiornamento a trasmissione diretta.
17,98 € SU AMAZON
REDREX
Redrex Ender 3 V2 Estrusore Bowden Extruder Alluminio MK8 Drive Feeder Compatible with Creality Ender 3 Serie CR-10 e Altre Piastre Riscaldanti Prusa Stampante 3D(Mano Destra)
Spedizione gratuita
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Ricambio originale per migliorare la serie Creality CR10 Ender 3: CR-10 S4, Cr-10 S5, CR-10 Mini, CR-10S ,CR-10 Plus e Ender 3 . Questo estrusore dal telaio durevole in alluminio è molto più stabile di quello in plastica.
Sistema Bowden supportato: è fornito con il support per un motore di tipo NEMA, lavora egregiamente su una Tarantula I3 TEVO, Anycubic Kossel i3, Mega, Flsun i3, MO Select e tutte le altre stampanti 3D che supportano il sistema Bowden.
E’ supportata l’estrusione diretta: Con la sostituzione di alcune viti, questo upgrade funziona anche su telai per estrusori di tipo MK8.
Tipi di filament raccomandati: PLA/ABS/Wood/TPU/PTEG, l’ingranaggio trattore a 40 denti trascina il filamento da 1.75mm molto fluidamente.
11,98 € SU AMAZON
bondtech lgx lite v2
bondtech lgx lite
lgx lite extruder