main logo

Bms 18650

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 21 aprile 2025
Jadeshay
Jadeshay
Jadeshay BMS 18650 Batteria Scheda di Protezione Cella agli ioni di Litio Scheda di Protezione della Batteria 10S 36V 30A con Funzione di Bilanciamento Sovraccarico Sovracorrente Protezione
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 【Sicuro da Usare】Una scheda di protezione per batterie al litio prodotta professionalmente, che supporta la protezione da sovraccarico, sovrascarica e cortocircuito, con funzione di protezione dal controllo della temperatura e funzionamento stabile.
  • 【Facile da Usare】Produzione standard, linee morbide, la scheda di protezione della batteria al litio può essere facilmente tenuta in mano, facile da installare, facile da collegare con precisione e facile da smontare.
  • 【Tipi di Batteria Compatibili】Questa BMS scheda di protezione è adatta per batterie agli ioni di litio a 10 celle, può essere utilizzata per batterie ternarie da 3,7 V, batterie all'acido di manganese e batterie all'acido di cobalto.
  • 【Ampia Gamma di Applicazioni】Con la funzione di bilanciamento, può garantire che ogni unità della batteria sia completamente carica allo stesso tempo, adatta per veicoli elettrici, ciclomotori elettrici, scooter, inverter, ecc.
  • 【Leggero e Compatto】Non occupa troppo spazio, scheda di protezione per batterie al litio è facile da trasportare e da riporre; la corrente di lavoro massima è di 30A, la scelta della scheda di protezione corretta può prolungare la durata della batteria.
  • 13,99 € SU AMAZON
TECNOIOT
TECNOIOT
TECNOIOT 5pcs 4S 40A 14.8V 16.8V 18650 Lithium Battery Protection Board BMS PCB
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • 【4S40A】4S 40A 18650 Lithium Li-ion Battery Protection Board.
  • 【Design compact】Charging Voltage: 16.8V~18.1V; Continuous Discharge Current (upper limit): 40A(If the cooling environment is not good, please reduce the use of load current.);Continuous Charge Current (upper limit): 20A;Size: About 45x55x3.4mm/1.8x2.2x0.13";Scope: Nominal voltage of 3.6V, 3.7V lithium battery(including 18650, 26650, lithium polymer battery).
  • 【Easy operation-1】 1. Please allow tiny size deviations due to human measurement.2. This item is an enhanced version BMS PCB without any equalized charging.3. The successful start of the drill requires four 10C-20C power battery, or eight 5C-10C power battery(ordinary 18650 can not start the drill!!).
  • 【Easy operation-2】4. Strictly according to wiring guide 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not touch any components on the board while soldering the wire to avoid short circuit. 5. When soldering the battery for the first time or when charging, as long as a single battery exceeds 4.2V, the "430" resistor will heat up and discharge (stopping heating when discharged to 4.19V or so). If the "430" resistor is severely heated (it's too hot to touch), please check if the wrong line is connected.
  • 【Easy operation-3】6. When connecting 4 groups of batteries in series, please ensure that the voltage of each group of batteries is the same. If they are different, please charge each group of batteries individually and reconnect it in series. In the discharge test, the battery with a faster voltage drop is a poor battery.
  • 16,29 € SU AMAZON