Betafpv Meteor75 Pro Frame
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
27 marzo 2025
BETAFPV
BETAFPV Meteor75 Pro 1S Brushless Drone with Matrix 1S 5IN1 FC, 1102 22000KV Motor, 45mm 3-Blade Prop for FPV Freestyle Racing Indoor Outdoor, Fly Time Up to 6.5Min with BT2.0 550mAh 1S Lipo - ELRS
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Ultra-Powerful: Meteor75 Pro 1S brushless whoop quadcopter is the largest available 1S whoop on the current market. It can offer pilots a faster, more responsive flight experience, and longer flight time, which would be ideal for FPV racing or acrobatic flying indoors or outdoors
Matrix 5IN1 FC: The upgraded Matrix 1S Brushless Flight Controller brings exceptional durability and performance to the Meteor75 Pro. It features a G473 processor, boosting computing speed by 55%, along with an integrated 5.8GHz 400 VTX for seamless integration. Its robust 1mm-thick board adds durability, and the built-in motor plugs simplify installation, making it ideal for beginners while ensuring excellent performance for FPV racing and freestyle
Frame&Propellers: Meteor75 Pro brushless whoop frame is built for the largest 1S brushless drone quadcopter. Featuring motor holders for convenient installation, and it is perfect for 45mm propellers. This combo performs very precisely, agile, and fantastic flying. It greatly enhances the thrust for 1S whoop
Motors&Battery: Meteor75 Pro features updated powerful 22000KV 1102 motors and BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter
Camera&Canopy: Built-in 1.45g ultralight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones. Adopted with an injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone
142,99 € SU AMAZON
BETAFPV
BETAFPV Meteor75 Pro Brushless Whoop Quadcopter with Matrix 1S 3IN1 HD FC, 1102 22000KV Motor, 45mm 3-Blade Prop Compatible for O4 Air Unit for FPV Filmmakers Enthusiasts Flight Indoor Outdoor - PNP
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Matrix 3IN1 HD FC: Meteor75 Pro brushless drone powered by the Matrix 1S 3IN1 HD FC, offering enhanced integration, performance, and seamless operation. This Matrix 3IN1 HD flight controller combines a FC, ESC, and ELRS RX into a compact, lightweight unit, eliminating analog OSD for seamless performance, which ensures digital image transmission, even in challenging conditions, giving pilots the confidence to push their flights further
Shock-Absorbing Components: Meteor75 Pro brushless drone features dedicated shock-absorbing components to address the O4 Air Unit's sensitivity to high-frequency vibrations caused by its built-in gyro for video stabilization. These components use 4 carefully designed shock-absorbing balls to connect the O4 Camera to the bracket securely, and effectively isolate and absorb high-frequency vibrations, ensuring smooth, stable footage and eliminating image shake or jello effects during FPV filming
Upgrade & Performance: The Meteor75 Pro brushless drone builds on the ease-of-use and durability of the Meteor75 Pro, delivering smooth, high definition aerial photography with the O4 Air Unit. Its soft flying style is ideal for filmmakers, with optimized PID parameters, extended throttle range, and adapted RATE configurations for precise altitude control and natural camera movements. Perfect for cinematic creations and recreational flying, it offers unparalleled stability
Canopy for O4 Air Unit: Tailored for whoop drones, the canopy for O4 Air Unit integrates BETAFPV's signature micro canopy design with optimized inner space and mounting holes for O4's shock-absorbing components. Featuring an adjustable camera angle from 10° to 35°, it ensures perfect HD footage without capturing the frame or canopy
Propulsion System: Meteor75 Pro brushless drone is powered by 1102 | 22000KV motor GF 45mm 3-Blade props, enhanced continuous 12A ESC, and the high-performance LAVA 1S 550mAh battery (Not included), delivering a seamless balance of power and efficiency. This advanced setup effortlessly handles the size and weight of the O4 Air Unit while providing an impressive 5:30-mins flight time. With this finely tuned power system, you can confidently achieve smooth, high-definition aerial footage on flying
114,99 € SU AMAZON
BETAFPV
BETAFPV Gemfan 12pcs 45mm 2-Blade Propeller with 1.5mm Shaft Hole Compatible for RC FPV Whoop Drone for Freestyle Like Meteor75 PRO Whoop Drone Quadcopter with 1102 Brushless Motors
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
The 45mm 2-blade propellers feature high efficiency and are precise in operation for freestyle.
Weighs only 1.30g/set. It is compatible with parts on the 1S Meteor series whoops and is super easy to swap and upgrade build.
BETAFPV Gemfan 45mm 2-blade propeller made of high-quality PC material with the high efficiency and durability.
Meteor75 Pro frame with 45mm 2-blade propellers with 1.5mm shaft performs very precise, agile, and fantastic flying.
You will receive 12pcs 45mm 2-blade propellers(6CW+6CCW) in 3 different colors, including clear blue, clear gray, pink.
13,99 € SU AMAZON
BETAFPV
BETAFPV Gemfan 16pcs 45mm 3-Blade Whoop Drone Propeller with 1.5mm Shaft Hole Compatible for FPV Racing Like Meteor75 PRO 1S FPV Whoop Drone Quadcopter
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
The 45mm 3-blade propellers provide more power and fast speed for FPV drone racing.
Weighs 1.69g/set. It is compatible with parts on the 1S Meteor series whoops and is super easy to swap and upgrade build.
BETAFPV Gemfan 45mm 2-blade propeller made of high-quality PC material with the high efficiency and durability.
Meteor75 Pro frame with 45mm 3-blade propellers with 1.5mm shaft performs very precise, agile, and fantastic flying. It might be perfect for HD VTX indoors.
You will receive 16pcs 45mm 3-blade propellers(6CW+6CCW) in 3 different colors, including clear blue, clear gray, black, and white.
13,99 € SU AMAZON
BETAFPV
BETAFPV 4pcs BT2.0 450mAh 1S Battery 4.35V 30C/60C FPV Lipo with BT2.0 Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Meteor75 Tinyhawk
20% Sconto
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【1.0mm Banana Connector】BT2.0 connector AKA 1.0mm Banana Connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector
【Discharge Rate】By solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning
【High efficiency】BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with it
【More durable】Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power
【High quality】High-end technology to guarantee high quality and consistent performance
24,79 € (6,20 € / unità) SU AMAZON
BETAFPV
BETAFPV Pavo20 Pro Brushless Whoop Frame Kit with HD Digital VTX Bracket, PA12 Thickened Duct, Effortless Install, for DIY Cinewhoop Drone Quad like Pavo20 Pro with HD Digital Camera
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Constructed with a crash-proof PA12 thickened whoop duct. Its reinforced cross-section design enhances the strength and blast resistance
Employing the principles of aerodynamics, the frame boosts an extra 8~11% thrust compared with without the whoop duct, coupled with LAVA Series 1104 Brushless Motors, enabling Pavo20 Pro up to 6'40'' flight time
Add 2 new cam fixed holes for the wide-angle mode shooting. The cam side panel protects the lens from effective harm, eliminating any concerns about angle deviation after intense flights while allowing for easy vertical installation of ND filters. Featured the Pavo Series' Classic Rubber Damper Design, delivers a consistently smooth, HD image
Integrated injection molding HD VTX mounting bracket eliminates the hassle of adjusting screw tightness, and hassle-free installation with only 8 screws. The antenna holder is tailored to the contours of the antenna's form and installation, ensuring easy assembly and secure retention
An open-ended battery strap slot including side-limitation slots ensures secure and stable battery placement that accommodates a wide range of batteries
19,99 € SU AMAZON
BETAFPV
BETAFPV Pavo Pico Brushless Whoop Frame with HD VTX Bracket, 80mm Wheelbase, PA12 Material, Ultra-Light, Toughness, for HD Digital VTX like DJI O3 Air Unit, Walksnail Avatar HD Pro, Caddx Vista Kit
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Pavo Pico Frame】The Pavo Pico frame kit is a split design frame with an HD VTX mounting bracket. Die-cast screw whoop frame design increased whoop quadcopter strength and precision, enhance flight stability, and improved reliability.
【HD VTX Bracket】HD digital VTX bracket made of lightweight and tough injection-molded PP material with an adjusted structure to prevent HD VTX displacement or loss after the crash.
【Vibration Damping Design】We have incorporated the Rubber Damper design to reduce low-frequency vibrations, which is used with GyroFlow stabilization software for a stable and clear camera image during high-speed flight.
【More Batteries Choices】With 16mm*12.7mm battery slot size, recommend pilots use 450mAh 2S batteries. To accommodate a wider range of battery sizes, the main body of the frame can be trimmed through DIY methods at the same time. Additionally, larger batteries can be installed by using battery straps or printed components.
【Compatible HD Kits】Pavo Pico brushless whoop frame supports to install the DJI O3 directly, while Avatar and Vista require a 20*20 mounting plate and screws (included) for fixation. Install quickly and effortlessly, while meeting pilots' various DIY needs, and exploring more possibilities for flying.
14,99 € SU AMAZON
BETAFPV
BETAFPV Gemfan 2218 - 12 eliche a 3 blade ultra leggere FPV con foro di 1,5 mm, compatibile con motore brushless Pavo20 Pro Frame 1104 7200 KV, colore: Nero
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Il primo prop da 2,2" è progettato per aumentare la potenza del tuo drone rispetto ai limiti di 2". Compatibile con i motori senza spazzole LAVA Series 1104 e il telaio Pavo20 Pro, offre un PRM elevato, max thrust, e una potenza lineare stabile come il sistema di propulsione dei riflessi cheetah
Con il suo diametro maggiore e basso pitch, questa elica a 3 lame 2218 sblocca un RPM più elevato, offre un'esperienza di volo reattiva e fluida che supera sia la precisione a bassa velocità e le prestazioni di freestyle ad alta velocità
Con un peso ultra leggero di soli 2,32 g/set, ridefinisce un nuovo standard ultra leggero per un cerchio avanzato di freestyle cinewhoop mentre migliora la propulsione del tuo drone
Gemfan 2218 3-Blade eliche owns a propulsion system specially for freestyle, providing pilots with a broader creative space, capturing visually impactful and professional-quality footage with ease
You will receive 12 eliche a 3 lame 2218 (6CW + 6CCW) in nero
13,99 € SU AMAZON
BETAFPV
BETAFPV Cetus Pro 75mm Brushless Frame Bianco Compatibile per Cetus Pro Brushless Drone Quadcopter 1102 Brushless Motor C02 FPV Micro Camera
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Applicazione】 Il telaio Cetus Pro è compatibile con un FC brushless Lite 1-2S Pro, motori brushless 1102-18000KV e puntelli a 3 pale da 40 mm. E i piloti possono utilizzare le parti elettroniche originali e i motori del tuo kit Cetus pro
【Materiale】 Realizzato in materiale PA12, il telaio ha un'eccellente resistenza agli urti in caso di caduta e impatto. Nel frattempo, la protezione a 360° del telaio whoop garantisce voli sicuri sia all'interno che all'esterno
【Installazione】 Il telaio Cetus Pro è un rack singolo da 75 mm che pesa 15 g. Qualsiasi parte del quadricottero Cetus Pro è semplicemente plug-and-play, non è necessario saldare
【Supporto】 Per qualsiasi problema contattaci tramite Amazon. Non importa cosa c'è che non va nei tuoi articoli BETAFPV, ti aiuteremo
10,99 € SU AMAZON
BETAFPV
BETAFPV 2pcs Air65 Brushless Whoop Frame Kit, Ultra Light Weight, Lowered Profile, for DIY Ultra Light 65mm 1S Racing Whoop Drone Quadcopter with 07XX 08XX Series Motors 31mm Propellers
Spedizione gratuita
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Ultra Light Weight】Weighing a mere 2.67g, Air65 Brushless Whoop Frame exemplifies exceptional ultra-light structure while maintaining remarkable durability and crash resistance
【Motor Fixed Slots】 A groundbreaking addition to the 65mm frame, the inclusion of motor fixed slots enhances the convenience and stability of the motor installation like 07xx 08xx series motors. Pls note it is not compatible with the T-0802 Motor (Old Version)
【Lower Profile Design】 The low profile design effectively concentrates the whoop drone's gravity, optimizing its flight performance and improving the sense of compactness
【Duct Diameter Increased】The deliberate increase in whoop duct diameter effectively mitigates the risk of propeller strikes. Pls note some diamond-shaped flight controllers are not suitable for installation here
【Air Canopy】 Compatible with newly released Air Canopy which not only facilitates camera angle adjustment from 25° to 50° but also has antenna mounts, incorporated at the tail. Allowing pilots to customize their whoop into the ultimate 1S brushless racing drone
14,99 € SU AMAZON
betafpv meteor75 pro
frame pro
meteor75 pro
#1 VINCITORE
