main logo

Betafpv Elrs 2.4 Tx

I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento: 15 novembre 2024
BETAFPV
BETAFPV
BETAFPV ELRS 2.4GHz Micro Receiver Support 5 CH PWM Outputs Failsafe Function with IPEX MHF T Antenna Compatible for Multirotors Fixed-Wing Helicopters RC Cars Boats Easy to Install Plug and Play
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 【PWM Output】BETAFPV ELRS Micro receiver is the first ELRS receiver with PWM output on BETAFPV. Supports 5 channels PWM outputs. It also supports flash CRSF output firmware, in this case CH2 corresponds to TX and CH3 corresponds to RX
  • 【Application】ELRS micro receiver adapts for multiple types of models like fixed-wing, helicopters, RC cars, boats and etc.
  • 【Failsafe Function】When the connection or signal is lost between the radio transmitter and receiver, the failsafe function will adjust all the channels to the failsafe values set by the users, maximum keep safety and prevent from flying away. It's necessary to set up failsafe values properly if you are not using a flight controller, such as RC fixed-wing
  • 【Weight&Size】Weighing about 4.5g with an antenna and with the sizes of 19mm*32mm*9mm (without antenna). It means that an FPV drone can not afford to carry.
  • 【Plug &Play】With the plug-and-play connect ports, micro receiver is very easy to use and does not need to solder
  • 16,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV ExpressLRS 2.4G OpenTX Mini Nano Ricevitore Prestazioni a Lungo Raggio ad Alta Frequenza di Aggiornamento per Drone da Corsa FPV
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • 【ExpressLRS 】ExpressLRS è un link RC aperto a source per applicazioni RC, basato su Semtech Lora SX127x o SX1280 hardware per RX e TX Recectively. Questo rende ExpressLRS uno dei più rapidi RC disponibili a sinistra e offre prestazioni di lunga .
  • 【Il ricevitore ExpressLRS】BETAFPV Nano Receiver è basato sul projececect ExpressLRS, un link a source RC per applicazioni RC che consentono di ottenere le migliori prestazioni di collegamento possibili in entrambe le velocità, latenza e gamma per moduli ELRS TX o Nano Bay, ecc.
  • 【Crossfire Serial Protocol】ExpressLRS utilizza il protocollo seriale Crossfire (protocollo AKA CRSF ) per comunicare tra il ricevitore e la scheda di controllo del volo. In questo modo la scheda di controllo del volante supporta il protocollo seriale CRSF. Come impostare il protocollo CRSF può essere visto sul manuale (lingua italiana non ).
  • 【Nano Size】questo ricevitore ha solo 0,7 grammi e il volume è di 12 mm x 19 mm, molto adatto per bambini perché sono ultra leggeri e nano.
  • 【Configuration & Bind】 Nano receiver could enter binding status by power on/off three times. Step: Plugin and unplug nano receiver three times; Make sure the LED is doing a quick double blink, which indicates the receiver is in bind mode; Make sure the RF TX module or radio transmitter enter binding status, which sends out a binding pulse; If the receiver has a solid light, it's bound.
  • 22,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV ExpressLRS 2.4G Lite Receiver with Flat SMD Ceramic Antenna High Refresh Rate Long Range Performance Compatible for 65/75/85mm FPV Racing Whoop Drone
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • 【Performance】Ultralight ELRS Lite receiver has a 2.4GHz Flat SMD ceramic antenna. A solid flat antenna without irregular parts can withstand crashes, making the receiver not so fragile. Perform well in control, range and stability, bringing a good flight experience to pilots
  • 【Weight&Size】New lite receiver with a flat antenna features a 3mm extra-thin board and 0.53g lightweight, which requires less assembly space on drones with limited space
  • 【ExpressLRS】 ExpressLRS is an open-source RC link for RC applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance
  • 【ExpressLRS Lite Receiver】BETAFPV ELRS Lite receiver is based on the ExpressLRS project, an open-source RC link for RC applications that aims to achieve the best possible link performance in both speeds, latency, and range suit for ELRS TX module, etc
  • 【Configuration & Bind】The Lite receiver comes with officially major release V1.1.0 protocol and no Binding Phrase included. Lite receiver could enter binding status by power on/off three times
  • 16,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV ExpressLRS 2.4G Protocol Radio Transmitter Main Board with 8 Channels RF Power 25mW/50mW/100mW Compatible for DIY Remote Controller Case of LiteRadio 2 LiteRadio 2 SE Radio Transmitter
Spedizione gratuita
star

91

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • 【ExpressLRS 2.4G Protocol】This BETAFPV ExpressLRS 2.4G protocol radio transmitter mainboard is the world's first ELRS radio controller mainboard, supported BETAFPV Configurator for firmware update and parameter configure
  • 【Performance】This motherboard has a total of 8 channels. Supports 3 RF powers of 25mW, 50mW and 100mW, and packet rates of 50Hz, 150Hz, 250Hz and 500Hz. Meanwhile, it built-in a charging circuit to support 1S battery which can use the type-c cable to charge the battery without replacing battery
  • 【Compatible Transmitters/Applications】This Main Board is compatible with the remote controller case of all LiteRadio 2 and LiteRadio 2 SE. It is easy and convenient for installation. For the owner of this radio transmitter, getting this mainboard is the most budget way to try the most popular ExpressLRS 2.4G radio link protocol.
  • 【FPV Simulator】BETAFPV ExpressLRS 2.4G protocol radio transmitter mainboard has the function of FPV simulator which can act as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE
  • 【Technical Support & Warranty】We have a professional team and considerate after-sales service. If you have any questions, you can contact us by email, and we will definitely reply you within 24 hours. We offer a warranty for all goods within 3 months!
  • 21,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV F4 1S 5A AIO Brushless Flight Controller with Serial ELRS Receiver, 8MB Blackbox, Support Flash via WIFI, with Motor Pin/BT2.0 Cable Connector for 65/75mm 1S Micro FPV Whoop Drone Quadcopter
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#5

  • Integrates with a Serial ExpressLRS 2.4G receiver, which can be updated via Wi-Fi or Betaflight serial passthrough. It is convenient for pilots to flash any version of ELRS RX firmware without updating flight controller firmware
  • Built-in an 8MB flash memory chip dedicated to Blackbox logging. It’s a potent tool for tuning and troubleshooting an FPV drone
  • With BMI270 gyro, BB51 ESC hardware with Bluejay ESC firmware. ONLY the Betaflight firmware 4.3.0 and up start to support this BMI270 gyro
  • With Bluejay ESC firmware, it supports bidirectional D-shot and RPM filtering in Betaflight, offers 24KHz, 48KHz, and 96KHz fixed PWM frequency for options, and custom start-up melodies
  • Serial ELRS 2.4G RX uses the Crossfire serial protocol (CRSF protocol) to communicate between the receiver and the flight controller board
  • 49,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV Meteor75 Pro 1S Brushless Whoop Drone Quadcopter with 45mm 3-Blade Propellers for FPV Freestyle Racing Indoor Outdoor, Fly Time Up to 6min with BT2.0 550mAh 1S Lipo Battery-ELRS
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • 【Ultra-Powerful】Meteor75 Pro 1S brushless whoop quadcopter is the largest available 1S whoop on the current market. It can offer pilots a faster, more responsive flight experience, and longer flight time, which would be ideal for FPV racing or acrobatic flying indoors or outdoors.
  • 【Frame&Propellers】Meteor75 Pro brushless whoop frame is built for the largest 1S brushless drone quadcopter. Featuring motor holders for convenient installation, and it is perfect for 45mm propellers. This combo performs very precisely, agile, and fantastic flying. It greatly enhances the thrust for 1S whoop
  • 【Motors&Battery】Meteor75 Pro features updated powerful 22000KV 1102 motors and BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.
  • 【FC&ESC】Equipped with F4 1S 5A flight controller(Serial ELRS). The ELRS RX version comes with the default ELRS V2.0 firmware and supports being upgraded to ELRS V3.0 separately without flashing Betaflight FC firmware. The ESC on the board is powered by BB51 hardware in place of BB21, and the gyro to BOSH BMI270 for better performance and stability.
  • 【Camera&Canopy】Built-in 1.45g ultralight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones. Adopted with an injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
  • 142,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV Pavo Pico ELRS Brushless Whoop Quadcopter Ultra-Light 2S Cinewhoop con HD VTX staffa, F4 2-3S 20A AIO Flight Controller, 1102 14000KV Motore per DJI O3 VTX per Cruising Indoor Outdoor
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Il drone whoop brushless ultra leggero Pavo Pico con il passo più piccolo supporta DJI O3 Air Unit. Esplora più possibilità garantendo al contempo una qualità dell'immagine HD
  • Grazie alla staffa di montaggio HD VTX dal design diviso, Pavo Pico supporta l'installazione rapida dei moduli VTX digitali DJI O3 HD e un design antivibrante in gomma con software di stabilizzazione GyroFlow garantisce l'uscita di video ad alta definizione e immagini HD fluide
  • Lo slot della batteria e l'altezza del condotto della staffa di montaggio HD VTX sono stati ridotti per migliorare l'esperienza di volo complessiva. Sono supportati anche metodi di fissaggio della batteria fai-da-te, che li rendono compatibili con batterie di varie dimensioni e capacità
  • Il nuovo F4 2-3S 20A AIO FC V1 aggiornamenti da F4 1S 12A FC V3, pesa solo 5,92 grammi ed è ottimizzato per VTX digitale HD. La sua potenza di calcolo migliorata, l'alta velocità di risposta e il volo stabile lo rendono la scelta ideale per i whoops HD
  • Accoppiato con l'elica Gemfan da 45 mm ad alte prestazioni, il motore brushless 1102 14000KV e il telaio in materiale PA12, questo sistema di alimentazione raggiunge un equilibrio superbo, garantendo un sollevamento potente e un volo stabile, fornendo anche un controllo preciso e reattivo
  • 169,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV ELRS Pavo20 Brushless Whoop Quadcopter Lightweight 3S Cinewhoop with HD Digital Bracket, F4 2-3S 20A FC, 1103 8500KV, COB LED Strip, for HD Digital VTX like DJI, Flight Indoor Outdoor
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Cinewhoop da 2": Pavo20 è la scelta ideale per piccoli interni ed esterni leggeri da 2" DJI O3 cinewhoop sotto i 150 g. Con la sua base a ruote da 90 mm e un sistema di alimentazione aggressivo, il suo esclusivo whoop duct boosts thrust, aggiungendo anche un tocco di creatività ai tuoi scatti. Sperimenta il pinnacolo dell'innovazione con DJI O3 ed embark su un nuovo livello di cinematografia aerea.
  • Videocamere compatibili: la staffa di montaggio a iniezione integrata HD VTX ha un design split e supporta diversi tipi di HD VTX come DJI O3 Air Unit, Caddx Vista, Runcam Link. Facilmente installabile per i piloti fai da te ed esplora più possibilità, garantendo una qualità dell'immagine HD. Il pannello laterale della fotocamera e il foro di fissaggio a 4 punti garantiscono una protezione dell'obiettivo senza compromessi.
  • Telaio Pavo20: Pavo20 con telaio a ruote da 90 mm è costruito con uno spessore di taglio PA12 resistente agli urti, il suo design a sezione trasversale rinforzata migliora la resistenza e la resistenza agli urti, garantisce una maggiore durata in condizioni di volo richieste. Inoltre è dotata di strisce LED COB senza cuciture che possono essere montate in modo sicuro sul telaio del cerchio, aggiungendo un effetto di illuminazione unico e un'appearance.
  • 【Potente FC】Equipped with F4 2-3S 20A AIO flight controller integrated features such as a 16MB black box, with support for GPS, external receivers, and other devices. Il layout del cuscinetto solder e il connettore USB rendono l'installazione e la manutenzione più facili e convenienti. Inoltre include un DJI O3 6-pin PMU allowing per la connessione a HD VTX senza saldatura.
  • 【Sistema di alimentazione: dotato di motore 1103 8500 KV e 2'' props, questo sistema di alimentazione garantisce un'agilità eccezionale e una manovrabilità in spazi stretti, supporta anche batterie 3S da 450 mAh ~ 650 mAh, offrendo un perfetto equilibrio tra tempo di volo e prestazioni. Uno slot aperto per cinghia della batteria che accetta una vasta gamma di batterie. Side-limitation slots ensure and stable battery placement, preventing any potenzial displacement during flights.
  • 169,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV SuperD ELRS Diversity Receiver with Dual RX Chains 2 Antennas TXCO Tech Support CRSF Protocol for FPV Drone Fixed-Wing Aircraft Long Range Flying Aerial Photography FPV Freestyle Tricks-868M
Spedizione gratuita
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 【TXCO Oscillator】SuperD ELRS 868MHz Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long-range flight.
  • 【ELRS 868M】The first true diversity receiver for the 868MHz frequency bands, with two separate receiving modules working together to improve signal reception quality and overall reliability. The 868MHz radio system exhibits greater diffraction ability due to its lower frequency.
  • 【Receivers&Antennas】BETAFPV SuperD 868MHz diversity receiver has two dual RF receiver chains with two Dipole T antennas, which will create an omnidirectional signal for good transmission, ensuring longer and more stable flying for FPV drones and RC airplanes.
  • 【Compatible Items】Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long-range flying. It greatly fulfills the requirements of reliability for long-range flying, aerial photography, or FPV freestyle tricks.
  • 【Notice】The SuperD ELRS 868MHz Diversity Receiver's default firmware is ELRS V3.3.0. The official version has not yet been released. It will be updated synchronously with the ELRS V3.3 version. Then you can check the latest ELRS Configurator Nightly to operate. Select the target device ''BETAFPV SuperD 900MHz RX''. Firmware for 868MHz is currently self-compiled firmware.
  • 28,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV Cetus X FPV Kit with Betaflight FC, 2S Brushless Drone Kit, for FPV Beginners to Advanced, with DVR Goggles, LiteRadio 3 Radio Transmitter, BETAFPV Configurator/Simulator Supported
Spedizione gratuita
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • 【Cetus X FPV Kit】The BETAFPV Cetus X 2S brushless drone quadcopter equipped with an improved propulsion system, VR03 goggles, a LiteRadio 3 radio transmitter controller and longer radio and video transmission, pilots can unlock further achievements at the next level
  • 【Betaflight Support】Flying a drone expertly is the first step to becoming a drone master, and the next is setting it up. With the support of the Betaflight configurator, beginners can learn quadcopter configuration using the Betaflight FC version
  • 【FPV Simulator Supported】Is this your first time flying a quadcopter? You can learn and practice flying a quadcopter with an FPV simulator before flying properly. LiteRadio 3 is available to play FPV simulators such as DRL/DCL/Uncrashed/Liftoff. More convenient for practicing and charging at the same time.
  • 【LiteRadio 3 Transmitter】The BETAFPV LiteRadio 3 radio transmitter features an ergonomically designed handle and offers excellent performance with an operating time of up to 15 hours. It also supports BETAFPV Configurator, a utility to easily update, configure and tune the radio controller. Experience the thrill of total immersion with unmatched control and capture the world around you.
  • 【VR03 Goggles】BETAFPV VR03 goggles have a DVR recording function. Pilots can enjoy playback saved via the goggles or export the videos via micro SD card (not included), which supports most analog VTXs on the market. This exciting feature allows pilots to capture the unforgettable, breathtaking moment, which greatly enhances the FPV flying experience
  • 【Package and Warranty】The quadcopter, radio transmitter, FPV goggles and all accessories are packed in a portable EVA storage bag. It is convenient to carry it outside and better protect the equipment. Please make sure all components are included, have no damage or deformation, and that all parts are fully charged before flying the kit. If not or no matter what is wrong with your BETAFPV articles, BETAFPV is guaranteed to help you!
  • 347,99 € SU AMAZON
betafpv elrs 2.4 modulo betafpv elrs 2.4 rx elrs 2.4 elrs receiver 2.4 radiomaster elrs 2.4 elrs 2.4 modulo ricevente elrs 2.4