main logo

Arduino Light

I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento: 2 febbraio 2025
CQRobot
CQRobot
CQRobot TCS34725FN Color Sensor Compatible with Raspberry Pi/Arduino/STM32. ADC, I2C Interface, Output RGB Data/Light Intensity Table. for Light Test, Phones, Computers, Industries, Lighting.
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • TCS34725FN is a low-cost, cost-effective RGB full-color color recognition sensor. The sensor recognizes the surface color of an object through optical sensing. It supports the three primary colors of red, green, and blue (RGB), supports bright light sensing, and can output the corresponding specific values to help you restore the true colors, and includes an IR blocking filter making it an ideal color sensing solution for use under varied lighting conditions.
  • CQRobot RGB Color SensorOnboard TCS34725FN, embedded ADC, high sensitivity, wide dynamic range. I2C communication, uses a few pins. Integrates IR blocking filter, minimizes the IR spectral component of the incoming light.
  • Outputs RGB data without white balance. Outputs light intensity, feels the light like human eyes. Supports light intensity interrupt output, programmable upper and lower thresholds. Supports fill-light by onboard LED, adjustable brightness by PWM.
  • Onboard voltage level translator, compatible with 3.3V/5V operating voltage. Compatible with motherboards such as Raspberry Pi/Arduino/STM32.
  • for Medical Health, Fluid and Gas Analysis, Color Temperature Measurement, Backlight Control for RGB LED, Product Color Verification and Classification, Ambient Light Sensing for TVS, Cell Phones, Tablets, Printer, Computers and Monitors, etc.
  • 14,99 € SU AMAZON
Treadax
Treadax
Treedix 48pcs RGB LED 5050 Light Board Light Matrix Strip Driver Board indirizzabile individualmente per Arduino e Raspberry Pi Compatibile con WS2812B
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • Si tratta di una piccola scheda concatenabile con 48 LED RGB 5050 WS2812
  • Ogni pixel di WS2812 è indirizzabile individualmente ed è necessaria una sola porta IO per controllare più LED.
  • Ci sono cuscinetti sul retro per collegare fili o perni breadboard per fissare la tavola a molte superfici diverse. Applicazioni: modulo a colori, luci morbide a colori una striscia di lampada. Illuminazione decorativa a LED, schermo video irregolare per interni/esterni a LED.
  • Il cablaggio è semplice e facile da controllare. Può emettere alcune luci LED a colori dopo una rapida saldatura. È compatibile con Arduino, Raspberry Pi, Teensy, T1000S, K1000C e altri controller programmabili.
  • Ci sono interfacce di connessione su entrambe le estremità, che possono essere collegate e scollegate direttamente, e possono essere utilizzate da sole e combinate in diverse forme. L'interfaccia di connessione seriale può completare la ricezione e la decodifica dei dati attraverso una linea di segnale. La libreria e il codice sono facili da usare e da usare
  • 20,12 € SU AMAZON
CQRobot
CQRobot
CQRobot 10.525GHz Doppler Effect Microwave Motion Sensor Compatible with Raspberry Pi and Arduino Motherboard. for Industrial, Measurement, Automatic Doors, Smart Lights, Reversing Radar, etc.
Spedizione gratuita
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • The microwave motion sensor is a microwave moving object detector designed by the principle of Doppler radar. Unlike ordinary infrared detectors, microwave sensors detect the movement of objects by detecting the microwaves reflected by the object. The detection object will not be limited to the human body, but there are many other things.
  • Non-contact detection; Adapts to harsh environments without affecting by temperature, humidity, noise, airflow, dust, light, etc. Powerful anti-RF interference capability; Low output power, no harm to human body; Long detection distance.
  • Can detects of non-living objects; The microwave moves at the speed of light with great directionality. Compatible with Raspberry Pi and Arduino Board.
  • Used in industrial, transportation and civil applications such as measuring, liquid levels, automatic door motion detection, automatic washing, production line material detection and car reversing sensors etc.
  • Note: There are ultra-high frequency MOS devices inside the microwave motion sensor. If you try to use battery power to test during the test, this can avoid the breakdown caused by the static pressure difference between the power supply and the test device, such as the oscilloscope; in addition, when the product is in use, Please try to choose battery power supply to ensure the best detection effect.
  • 17,99 € SU AMAZON
Youmile
Youmile
Youmile 8x32 Dot Matrix Single Blue Light MCU Control Modulo display LED per Arduino/MCU/51/AVR/STM32/Raspberry Pi
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • ✅Un singolo modulo può pilotare un catodo comune a matrice di punti 8x8
  • ✅Tensione di esercizio: 5V
  • ✅Dimensioni: 12,8x3,2x1,3 cm
  • ✅Viti di fissaggio con 64 fori di diametro 3mm
  • ✅Modulo con interfacce di input e output, supporto per moduli multipli in cascata
  • 11,49 € SU AMAZON
CQRobot
CQRobot
CQRobot TSL25911FN Ambient Light Sensor Compatible with Raspberry Pi, Arduino, STM32. 0 to 88000Lux Detection Range, 600M: 1 Wide, for Industry, Mobile Phone, Computer, Lighting, GPS, etc.
Spedizione gratuita
star

87

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • TSL25911FN is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I²C interface. The device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit.
  • Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response.
  • High sensitivity up to 188uLux, wide dynamic range up to 600M:1. Embedded infrared-responding photodiode, allows precise measuring even on strong infrared noise environment.
  • Embedded ADC, direct light intensity signal output to I2C interface, less noise jamming. Provides interrupt output with programmable upper and lower thresholds.
  • CQRobot Ambient Light Sensor Built-in TSL25911FN chip, Onboard voltage translator, compatible with 3.3V/5V operating voltage, Compatible with Raspberry Pi, Arduino, STM32 and other motherboards. Adopts TSL25911FN, measures infrared plus visible light. (wider range than TSL2561)
  • 12,99 € SU AMAZON
JE RY
JE RY
Guiding Lights of Arduino                        
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6
SU HADA
SU HADA
Disco Lights with Arduino                        
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7
Arduino Fun with Light and Spectrometers: Fun and interesting ways to collect data from the Arduino using Excel (English Edition)
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8
Muhammad Wildan
Muhammad Wildan
Yellow Light Blinking Arduino                    
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9
JE RY
JE RY
Guiding Lights of Arduino                        
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10
arduino light sensor light sensor arduino